PICMG 1.0 Half-size SBC SBC82820

General Details
The SBC82820 is a PICMG v1.0 compliant half-size PCI bus CPU card which supports Intel® Pentium® M and Celeron® M processors with a 400/533MHz front side bus. This slot CPU card is equipped with two DDR2 SODIMM sockets which provide maximum up to 2GB system memory capacity.

For large size LVDS LCD compliance, the SBC82820’s LCD interface is through SDVO port of the integrated graphic controller with LVDS transmitter to support single and dual channels 24-bit LVDS signal interface. In the meanwhile, on the edge of the I/O outlet, it also provides DVI-I interface for both CRT and DVI-D displays. By these display interfaces, the singe board computer can perform fully DualView features configured as CRT plus LVDS or CRT plus DVI-D or DVI-D plus LVDS types.

Taking the advantages of ICH6M’s rich integrated I/O functions, the PCI bus slot CPU card provides two onboard PCI Express x1 bus Gigabit Ethernet ports, one PATA-100 port, two SATA-150 ports, DMA CompactFlash™ type-II socket, 4 USB 2.0 ports, AC’97 Audio with amplified, and SMBus for customized monitor/control interface.

  • Socket 479 for Intel® Pentium® M/ Celeron® M processors with FSB 400 MHz
  • 2 DDR2 SO-DIMM support up to 2 GB memory
  • Dual 10/100/1000 Ethernet and Audio
  • DVI-I for VGA and DVI-D display output
  • Socket 479 Intel® Pentium® M/ Celeron® M processors with FSB 400/533 MHz; ULV Intel® Celeron® M processor 600MHz/512KB or 1GHz/ZC onboard
  • Intel® 910GMLE + ICH6M
System Memory
  • 2 x 200-pin SO-DIMM DDR2-400/533 up to 2 GB
  • Phoenix-Award
  • 1 x RS-232
  • 1 x RS-232/422/485
  • 4 x USB 2.0
  • 2 x 10/100/1000Mbps (Realtek RTL8111B)
  • 1 x VGA
  • 1 x DVI-I
  • 1 x LVDS
Digital I/O
  • N/A
  • MIC-in/Line-in/Line-out/Speaker out
  • 1 x CompactFlash™ type-II
  • 2 x SATA-150
  • 1 x PCI for 32-bit PCI supports 4 bus masters
  • 1 x IDE; PATA-100
  • 1 x FDD/LPT(default); with SPP/EPP/ECP supported
  • 1 x PS/2 keyboard & mouse
  • Lithium 3V/220 mAH
Power Requirements
  • Intel® Pentium® M @2.0 GHz, 1 GB DDR2
    Max.: +5VSB @ 38mA, +3.3V@54mA,+5V@2.253A,
  • -12V@22mA, +12V@1.361A
  • Intel® Pentium® M @1.0 GHz, 1GB DDR2
    +5V_SBY @ 29mA, +3.3V @ 41mA, +5V @ 2.553A,
  • +12V (System) @ 30mA, -12V @ 21mA, +12V (CPU)
  • @ 332mA
Watchdog Timer
  • 255 levels, 1~255 sec.
Hardware Monitoring
  • Yes
Operating Temperature
  • 0° ~ +60°C (32°F ~ 140°F)
Relative Humidity
  • 10% ~ 95% relative humidity, non-condensing
  • 185 x 122 mm
Board Thickness
  • 1.6 mm
  • CE
No Fields Found.

Leave a Reply

Your email address will not be published. Required fields are marked *